Homeowners need to be prepared for the winter. Wet, windy, and cold days can damage roofs and homes. So it’s imperative homeowners prepare their roofs by getting a roof inspection, now.
Heavy snow and ice can damage roofing shingles or cause damage and warping to rafters and trusses … not to mention add extra dollars to your heating bill.
Moving air in and out of your attic ensures less build-up of ice and snow on your roof. Attic ventilation systems are proven to save a homeowner at least 30% on energy bills.
Another hazard which often wreaks havoc on roofs in the winter months are gutter systems clogged with branches, leaves, and other debris.
Inspecting and cleaning your gutters (ideally) prior to winter is a tedious job … however it pays off for you in the long run.
Rain water and melting snow often stands on roofs. So ensuring the water has a proper exit route via your gutters and downspouts allows for you to rest assured leaks will not occur.
A good idea for homeowners is to check the fasteners on their gutters. Often, an improperly fastened gutter causes overflow and build up. Inside walls may then become damaged from leaking water.
Just as important is checking installation. Make sure your fasteners from one gutter piece to the next is secure. Also, ensure the gutters attached to your home are tight and secure.
Another culprit which causes roofs to leak is debris, limbs, and leaves that lay in the valleys of roof lines. Do a thorough walk through of your roof. Make sure all the valleys are free and clear of any debris that can add weight and act as a barrier to rain and melting snow.
Valleys in roofs are often the most common place a roof leak can occur. So make sure your roof shingles and roofing materials are adequately protecting this high-prone area for leaks.
Perhaps the number one cause for roofing leaks and damage to homes is due to flashing problems.
Flashing is the aluminum pieces often used to protect roofing edges. Flashing is the only barrier between your under-roofing and the elements of outside.
Roof flashing is found around the perimeter of your home. Also, roof flashing is found around roof vents, roof piping, and chimneys.
High winds and heavy winter rains can cause roof flashing to loosen, rip and tear. If flashing is not inspected prior to those rough winter months – you may get a costly problem on your hands.
Ensure your roof flashing is not ripped, torn, or coming loose from your home. If you find an area that looks a little questionable … you’re better off to replace it prior to those winter months.
Flashing costs very little to replace compared to replacing an entire roof or repairing a roof leak.
Roof Inspection for the Winter Months
Besides inspecting your roof and preparing it for the winter months, look at other areas of your home.
Check to see that your windows are properly sealed. Many times, an improperly sealed window is the culprit for leaks. Also, inspect outside doors and attic insulation.
Ideally, preparing your home for winter should start in the Spring or early Fall. However, it’s never too late if you haven’t already inspected your roof.
The scope of a proper roof inspection is usually too much for the average homeowner to do, alone.
You’re better off having a roofing professional inspect your roof for you.
Resource: General contractor Oshkosh WI